Shading
EXTERNAL VENETIAN BLINDS - PRECISE LIGHT CONTROL
Either light or dark - that is often not enough for customers. EXTERNAL VENETIAN BLINDS makes it possible to precisely control the incidence of light and thus make optimum use of daylight. Here Beck+Heun relies on a renowned partner: the sophisticated details of the EXTERNAL VENETIAN BLINDS from WAREMA - such as space-saving, self-cleaning or particularly darkening slats - make them high-tech products that leave nothing to be desired.
All external venetian blind variants at a glance
The right slat for every requirement
FLAT SLAT
- Extremely small package heights even with high installations
- Best view with horizontally positioned slats
- High flexibility even with wind loads
EDGE BEADED SLAT
- All punched holes with plastic eyelets to reduce abrasion
- Extremely small package heights due to optimised lamella geometry
- Good stability even under wind loads
Darkening lamella
- All punched holes with plastic eyelets to reduce abrasion
- Completely closing slat overlap for the greatest possible darkening
- Rolled-in rubber seal for better noise insulation
- Best possible stability even under wind loads due to the special slat geometry
The EXTERNAL VENETIAN BLINDS models - design variants
EcoClean™ | Edge beading | Rope guide | Rail guide | Execution working position / daylight transport | Turning bottom rail | |
FLAT SLAT | √ 1) | √ | √ | √ | ||
EDGE BEADED SLAT | √ | √ | √ | √ | √ | |
Darkening lamella | √ | √ | √ | √ | √ |
1) Excluding 60 mm slat width
EXTERNAL VENETIAN BLINDS - Many functions, many advantages
3x faster drive
The new STM motor is 3x faster than a standard motor and releases a patio door in under 20 seconds. Turning and slat positioning take place at standard speed. Nothing else needs to be considered during installation - planning effort, integration and control are unchanged.
EcoClean™ coating
When it comes together with UV light and moisture, the light-sensitive titanium dioxide coating on the top of the slats acts like a catalyst and decomposes organic dirt and smog particles. Self-cleaning is ensured by the superhydrophilic (water-loving) surface, on which the decomposed pollutants simply slide off when it rains.
Slats
Numerous slat widths, shapes and colours are available. The slats are made of a robust aluminium alloy (approx. 0.45 mm thick). The surface of the slats has been stove enamelled in a special process to resist corrosion.
Rope guide
If the sunshade is to be integrated as inconspicuously as possible into the façade, the filigree cable guide, only 3.3 mm thick, is the ideal solution.
Guide rail
Installation is carried out using spacers in conjunction with various standardGUIDE RAILS. A thermally separated and driving rain-proof guide rail is also available on request with SHADOW-TG.
Top rail girder
A noise-optimised aluminium top track support with cable holder is fitted as standard.
Top rail
The extruded top rail is made of 1.5 mm thick aluminium for low-vibration running.
Pack height optimised and flanged slat
The new geometry of the edge-flanged slat, with a reduced diameter of the edge flange, increases the stability and strength of the slat by over 5 %. The guide nipple with high-quality, flush-mounted 2-point welding and large counter plate transfers the stability to the GUIDE RAILS. The EXTERNAL VENETIAN BLINDS have a dynamic and expressive effect in a classically timeless design.
Bottom rail
Extruded, heavy bottom rail for a positive influence on the movement of the external venetian blind.
Ladder / loop cord
The lift tapes, also called Tex-tapes, are made of black, high-strength and specially coated polyester. Kevlar-reinforced polyester ladder cords are used for all flat and edge-flanged slats. For blackout slats, special aramid fibres are used for high stability and flexibility.