VENTILATION SYSTEMS
AIRFOX® L
Top-mounted ventilation system for built-in and TOP-MOUNTED BOXES
AIRFOX® L is the larger version of our variable ventilation element that can be combined with various boxes. As an overhead ventilation system, it is the perfect solution for new buildings and, despite its size, is inconspicuous after installation, as if it didn't even exist. Only the performance that this ventilation brings with it reveals: this is an AIRFOX® at work.
The models of the AIRFOX® L series
ROKA-THERM® 2 RG AIRFOX® L
- Installation box
- Closed on room side
- For electrically operated roller shutter hangings
ROKA-TOP® 2 RG AIRFOX® L
- Top box
- Easy assembly
- Closed on room side
- Incl. roller shutter, motor and RG-TG rail system
ROKA-SHADOW® 2 AIRFOX® L
- Installation box
- Closed on room side
- For EXTERNAL VENETIAN BLINDS
ROKA-TOP® 2 SHADOW AIRFOX® L
- Top box
- Easy assembly
- Closed on room side
- Incl. external venetian blind curtain and rail system
AIRFOX® L - Design variants
| Suitable for new construction | Suitable for renovation | Brickwork support | Air outlet on lintel side | Plaster / ETICS | For roller shutter | For external venetian blinds | |
| ROKA-THERM® 2 RG AIRFOX® L |
√ | √ | √ | √ | √ / √ | √ | |
| ROKA-TOP® 2 RG AIRFOX® L |
√ | √ | √ | √ / √ | √ | ||
| ROKA-SHADOW® 2 AIRFOX® L |
√ | √ | √ | √ | √ / √ | √ | |
| ROKA-TOP® 2 SHADOW AIRFOX® L |
√ | √ | √ | √ / √ | √ |
√ = fulfilled
AIRFOX® L
Breathe a sigh of relief - feel-good climate on principle
Main technical features
Performance data
| Air performance | 7 - 35m3/h |
| Power consumption | 4W (total system power) |
| Intrinsic noise | from < 12.7 dB(A) (sound pressure level 1m frontal) |
| Degree of heat provision | up to 91 % |
| Standard sound level difference | up to 42 dB |
| Cycle time | 60 sec. |
| Filter class | G3 |
| Minimum wall thickness | 300 mm (without plaster) |
| Inner cover | 115 mm x 260 mm (W x H) |
| Outdoor grille | depending on type |
| Humidity sensor | optional |
Ventilation automation
Each room can be ventilated decentrally and thus adapted to individual requirements. For example, the desired ventilation in the bathroom can be set higher than in other rooms according to the high humidity. Simple operation directly at the window is guaranteed. Optionally, there is the possibility of automatic control by a humidity sensor.
A Setting the fan speed
- 1 | 7 cubic metres / hour
- 2 | 15 cubic metres / hour
- 3 | 25 cubic metres / hour
A Setting the fan speed
Unit switched off
One-way ventilation
Alternating ventilation (with heat recovery)
C Activation of the sleep mode
D Filter change due
E Switching on the shock ventilation:
- 35 cubic metres / hour
- (70 cubic metres / hour in conjunction with humidity sensor)
Humidity sensor
This is mounted above or below the control unit in a flush-mounted box and wired to the control unit.
Properties
- Detection of relative humidity in the range from 0% to 100%.
- Parallel measurement of ambient temperature
- Mounting in surface-mounted or flush-mounted boxes
- Compatible with 55 x 55 mm switch ranges
Application
- Active dehumidification in the bathroom or kitchen
- Optimisation of ventilation by recording the room temperature
