Accessories
VENTILATION SOLUTIONS
Supply air element Siegenia Aeromat Midi - ventilation integrated in the box.
The secret of Aeromat Midi's success lies in its intelligent design with double locking mechanism. The volume flow limitation is another feature that is convincing. With these clever details, the natural pressure difference enables an air exchange that reliably meets the fresh air demand, regardless of the user. Aeromat Midi is to be used in particular as an after-flow opening for a central exhaust air. The ventilation module consists of the passive Aeromat Midi supply air element and the specially developed Beck+Heun mounting frame. The latter is used to integrate the supply air element into the inner leg of the roller shutter box.
1. mounting frame
For plastering on the room side (13 mm projection over the box surface). Is pre-assembled in the roller shutter box including the weather limb. With insulation core between ventilator and outer weather lug.
2. ventilation element
To be installed by the customer after plastering.
Air performance
- 13 m³/h at 2 Pa
- 18 m³/h at 4 Pa
- 21 m³/h at 5 Pa
- 25 m³/h at 7 Pa
- 26 m³/h at 8 Pa
- 30 m³/h at 10 Pa
Note
Ventilation planning and design, including the guarantee of exhaust air, is the responsibility of the planner or customer.
AERECO ZUROH 100 / 110 - Flat design for perfect integration
The highlight of the AERECO ZUROH 100 / 110 fresh air diffusers is the mechanical sensor. This detects the relative room humidity and regulates the opening cross-section of the dampers in the ventilation element. The higher the humidity, the wider the flaps are opened - and without auxiliary energy. This ensures that the necessary air flows into the rooms where it is needed. AERECO ZUROH 100 / 110 is mounted on the room side of the roller shutter or external venetian blind box using a specially developed mounting frame from Beck+Heun. The ZUROH 100 element is completely user-independent and has no lock. ZUROH 110 is equipped with a rotary knob with which it can also be closed by means of manual operation or set to continuous ventilation.
The highlight of the AERECO ZWRH 30 is the mechanical sensor. It detects the relative room humidity and regulates the opening cross-section of the flaps in the ventilation element. The higher the humidity, the wider the flaps are opened - and without auxiliary energy. This ensures that the necessary air flows into the rooms where it is needed. AERECO ZWRH 30 is mounted on the inner leg of the roller shutter box using a specially developed mounting frame from Beck+Heun. In addition, ZWRH 30 can be equipped with a closing element (optional accessory).
Mounting frame
For plastering on the room side (13 mm projection over box surface).
Ventilation element
The ventilation element is installed on site after plastering. Air performance 4.5 to 26 m³/h at 8 Pa.
Lever
With locking and opening lever (ZUROH 110 only).
Air flow
The vertical air flow provides more living comfort.
Note
Ventilation planning and design, including the guarantee of exhaust air, is the responsibility of the planner or customer.
